OT: Reflective Paint for marking trails to hunting spot

howboutthemdawgs

Sophomore
Aug 8, 2022
75
107
33
Anyone have a bead on the best paint to discreetly mark trees for marking a trail to be lit up by flashlight? I don't want bright-eye tacks. Rustoleum makes a "semi transparent reflective paint" that gets mixed reviews on the amazon. Thoughts?
 

ronpolk

All-Conference
May 6, 2009
9,144
4,742
113
I always just use the orange ribbon but that would be pretty similar to the tacks I guess.
 

turkish

Junior
Aug 22, 2012
964
349
63
Anyone have a bead on the best paint to discreetly mark trees for marking a trail to be lit up by flashlight? I don't want bright-eye tacks. Rustoleum makes a "semi transparent reflective paint" that gets mixed reviews on the amazon. Thoughts?
You think spray paint is sufficiently discreet but thumb tacks are not?
 
  • Haha
Reactions: Mts68

T-TownDawgg

All-Conference
Nov 4, 2015
4,591
4,368
113
Stop by a local DOT project office

Ask politely for any unneeded reflective glass bead samples from any local project

Using a Coleman stove and a disposable stainless coffee carafe, mix one part beads to one part polymer paint at 300 degrees, and apply liberally to desired trees, posts, and feeders. Will last for years.
 
  • Haha
Reactions: DawgsGoneWild

Dawgbite

All-American
Nov 1, 2011
8,740
9,300
113
You can buy a roll of DOT reflective tape that alternates every foot from white to red. Wrap that around a limb or the tree trunk. I used it all the time marking trailers.
 

Pilgrimdawg

All-Conference
Aug 30, 2018
1,704
2,156
113
If you are on private land then whatever works for you is great. For public land you have to be sneaky and use something that’s not obvious to anyone else or you will have a lot of unwanted help in hunting your spot. You might want to consider a mapping program for your phone like on X or something similar.
 

Shmuley

Heisman
Mar 6, 2008
23,822
10,616
113
Stop by a local DOT project office

Ask politely for any unneeded reflective glass bead samples from any local project

Using a Coleman stove and a disposable stainless coffee carafe, mix one part beads to one part polymer paint at 300 degrees, and apply liberally to desired trees, posts, and feeders. Will last for years.
“Wear protective clothing during preparation and application process.

Do not attempt near flammable materials.

Avoid application during periods of drought.”
 
  • Like
Reactions: T-TownDawgg

Treemydawg

Freshman
Sep 29, 2013
298
85
28
I know you don’t want bright eyes but they make a brown one that is discreet. They blend in with the bark on bigger trees really well